Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
- 11. Transmission
   11.2. General information
   11.3. Coupling cable
   11.4. Adjustment of a cable of coupling
   11.5. Coupling pedal
   + 11.6. Couplings (the engine and a transmission are established in the car)
   11.7. Coupling (the transmission is removed)
   11.8. Vyzhimna bearing
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



TRANSMISSION

11. Coupling

11.1. Technical characteristics

Type
One-disk, with a hummock drive
Diameter of a disk of coupling:
– 14 NV
190 mm
– X16 SV, C16 NZ, C16 NZ2 and 18 SV
200 mm
– C18 NZ, 20 NE, C20 NE and 20 SEN
216 mm
– 20 XEJ, C20 XE and X20 XEV
228 mm
Course of a pedal of coupling:
– all models
134,0-141,0 mm

Tightening moments

Protective plate of a case of coupling:
– the stamped
12 Nanometers
– the cast
6 Nanometers
Leading part of coupling to a flywheel
15 Nanometers
Fork of switching off of coupling to an axis of the squeezing lever
35 Nanometers
Bolt in an end face of an entrance shaft
15 Nanometers
Directing the vyzhimny bearing to a transmission case
5 Nanometers
Cover in a transmission end face:
– bolts М7
15 Nanometers
– bolts М8
20 Nanometers