Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
- 11. Transmission
   11.2. General information
   11.3. Coupling cable
   11.4. Adjustment of a cable of coupling
   11.5. Coupling pedal
   + 11.6. Couplings (the engine and a transmission are established in the car)
   11.7. Coupling (the transmission is removed)
   11.8. Vyzhimna bearing
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



11.3. Coupling cable

Removal

Removal of the bracket, fixing a carving tip of a cable of coupling to the squeezing lever

Fastening of a cover of a cable of coupling on ledges of a case of coupling

PERFORMANCE ORDER
1. In a motor compartment measure length of a carving tip of a cable of the coupling, acting of the squeezing lever. This size is necessary for using for ensuring the correct installation of a cable of coupling.
2. Remove a bracket, fixing a carving tip of a cable of coupling to the squeezing lever, and remove from the lever a carving tip (see fig. Removal of the bracket, fixing a carving tip of a cable of coupling to the squeezing lever). For simplification of removal move the lever to the engine.
3. Remove fastening of a cover of a cable of coupling from ledges on a coupling case (see fig. Fastening of a cover of a cable of coupling on ledges of a case of coupling).
4. In salon of the car remove the bottom panel of furnish in deepening for feet of the driver, then disconnect a returnable spring from a pedal of coupling and remove a coupling cable from a coupling pedal. Keep in mind that the returnable spring also fixes to a coupling pedal a coupling cable. For improvement of access it is recommended to remove a coupling pedal.
5. Through a partition of a motor compartment take a coupling cable in a motor compartment. Thus do not damage a sealing ring of a partition of a motor compartment.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. Establish a carving tip of a cable of coupling so that its vystupaniye from the squeezing lever was same, as well as before removal.
2. Check correctness of an arrangement of a sealing ring in a partition of a motor compartment.