Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
- 12. Mechanical transmission
   12.2. General information
   12.3. Adjustment of draft of the mechanism of a choice of transfers
   12.4. Knot of the lever of gear shifting
   12.5. Draft of the mechanism of a choice of transfers
   12.6. Gear shifting lever
   12.7. Protective cover of the lever of gear shifting
   12.8. Sealing rings of differential
   12.9. Sealing ring of an entrance shaft of a transmission
   12.10. Removal and transmission installation
   12.11. Transmission repair
   12.12. Speedometer drive
   12.13. Switch of lamps of a backing
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



12. Mechanical transmission

12.1. Technical characteristics

Type
5 synchronized transfers of a forward course and 1 transfer of a backing
Type
Code
With big (WR) or small (CR) transfer ratio
– 14 NV
F10
WR
– 16 SV, C16 NZ, C16 NZ2 and X16 SZ
F13
WR
– 18 SV, C18 NZ, 20 NE, C20 NE and 20 SEH:
   • till 1994
F16
WR or CR
   • since 1994
F18
WR or CR
– 20 XEJ
F20
CR
– C20 XE:
   • till 1994
F20
CR
   • since 1994
F18 +
CR
– X20 XEV
F18
WR or CR

Tightening moments

Fork of inclusion of the 5th transfer to an intermediate plate
22 Nanometers
Latch of a clamp of the 5th transfer to an intermediate plate
7 Nanometers
Protective plate of a case of coupling
7 Nanometers
Differential cover to a transmission:
– the cast
18 Nanometers
– the stamped
30 Nanometers
Face cover to a transmission:
– bolts М7
15 Nanometers
– bolts М8
20 Nanometers
Transmission to the engine
75 Nanometers
Knot of the lever of gear shifting to a floor
6 Nanometers
Cover of the mechanism of a choice of transfers to a transmission
15 Nanometers
Tightening bolt of fastening of a rod of the mechanism of a choice of transfers
15 Nanometers
Bolt in an end face of an entrance shaft
15 Nanometers
Blocking details to an intermediate plate
7 Nanometers
Intermediate plate to a transmission
15 Nanometers
The left support of the power unit to a body
75 Nanometers
The left support of the power unit to a transmission
65 Nanometers
Back support of the power unit to the bottom frame
40 Nanometers
The switch of lamps of a backing to a transmission
20 Nanometers
Plate of fastening of a drive of a speedometer
4 Nanometers