Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
- 12. Mechanical transmission
   12.2. General information
   12.3. Adjustment of draft of the mechanism of a choice of transfers
   12.4. Knot of the lever of gear shifting
   12.5. Draft of the mechanism of a choice of transfers
   12.6. Gear shifting lever
   12.7. Protective cover of the lever of gear shifting
   12.8. Sealing rings of differential
   12.9. Sealing ring of an entrance shaft of a transmission
   12.10. Removal and transmission installation
   12.11. Transmission repair
   12.12. Speedometer drive
   12.13. Switch of lamps of a backing
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



12.12. Speedometer drive

Removal

Unscrewing of a bolt of fastening of the holder of knot of a drive of a speedometer

PERFORMANCE ORDER
1. Unscrew the adjusting plug and take a cable of a drive of a speedometer from a transmission.
2. At existence disconnect the electric socket of the odometer.
3. Unscrew a bolt, the fixing holder and take knot of a drive of a speedometer from a transmission (see drawing).

Installation

PERFORMANCE ORDER
1. At installation it is necessary to use a new sealing ring and to cover it with greasing on the basis of a molybdenum disulfide. Tighten a bolt of fastening of the holder of knot of a drive of a speedometer the demanded moment. Connect a cable of a drive of a speedometer and the electric socket of the odometer.