Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
- 12. Mechanical transmission
   12.2. General information
   12.3. Adjustment of draft of the mechanism of a choice of transfers
   12.4. Knot of the lever of gear shifting
   12.5. Draft of the mechanism of a choice of transfers
   12.6. Gear shifting lever
   12.7. Protective cover of the lever of gear shifting
   12.8. Sealing rings of differential
   12.9. Sealing ring of an entrance shaft of a transmission
   12.10. Removal and transmission installation
   12.11. Transmission repair
   12.12. Speedometer drive
   12.13. Switch of lamps of a backing
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



12.5. Draft of the mechanism of a choice of transfers

Removal

PERFORMANCE ORDER
1. Weaken tightening a bolt, a fixing rod of the mechanism of a choice of transfers to draft.
2. Remove a fixing bracket, then take an axis of the universal hinge of draft.
3. Remove a spring bracket, then take an axis of knot of the lever of gear shifting from an arm of back fastening of the power unit.
4. Remove draft from the car.

Installation

Elements of draft of the mechanism of a choice of transfers
Draft is noted by an arrow.

PERFORMANCE ORDER
1. Check a condition of elements of draft and, if necessary, replace them (see drawing). It is not recommended to make further dismantling.
2. Installation is made in sequence, return to removal, but before a tightening of a tightening bolt adjust draft of the mechanism of gear shifting.