Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
- 14. Power shafts
   14.2. General information
   + 14.3. Power shaft
   14.4. Intermediate shaft
   14.5. Replacement of hinges of a power shaft
   14.6. Replacement of covers of hinges of equal angular speeds
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



POWER SHAFTS

14. Power shafts

14.1. Technical characteristics

Type
Different length, with hinges of equal angular speeds (CV JOINTS)

Tightening moments

Nut of fastening of a nave of a forward wheel:
– stage 1
130 Nanometers
– stage 2
Completely to weaken
– stage 3
20 Nanometers
– stage 4
To tighten on a corner 80 °
Basic bearing of an intermediate shaft:
– a bearing arm to the block of cylinders
55 Nanometers
– a bearing support to an arm
18 Nanometers
The bottom lever to the spherical hinge of a rack of a forward suspension bracket
70 Nanometers
Bolts of fastening of a wheel
110 Nanometers