Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
- 14. Power shafts
   14.2. General information
   - 14.3. Power shaft
      14.3.1. Removal
      14.3.2. Installation
   14.4. Intermediate shaft
   14.5. Replacement of hinges of a power shaft
   14.6. Replacement of covers of hinges of equal angular speeds
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



14.3. Power shaft

GENERAL INFORMATION

Prevention

At installation of a power shaft it is necessary to use a new nut, a washer and шплинт fastenings of a power shaft to a nave. At installation of the internal end of a power shaft it is necessary to use a new lock ring. For fixing of a nut of fastening of the spherical hinge it is necessary to use new шплинт. At removal of power shafts it is necessary to use a stripper of spherical hinges.


Arrangement of a quencher of fluctuations on right driving to a shaft on model of 2,0 l

Nave of a forward wheel