Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
- 15. Brake system
   15.2. General information
   15.3. Anti-blocking system of brakes (ABS)
   15.4. Pumping of hydraulic brake system
   + 15.5. Replacement of forward brake shoes
   15.6. Replacement of back brake shoes on disk brakes
   + 15.7. Replacement of back brake shoes on drum-type brakes
   15.8. Replacement of brake shoes of the hand brake on back disk brakes
   15.9. Support of a forward brake
   15.10. Support of a back disk brake
   15.11. Brake disk
   15.12. Forward brake disk
   15.13. A back brake disk on models with SOHC engines
   15.14. A back brake disk on models with DOHC engines
   15.15. Brake drum
   15.16. Back working brake cylinder
   15.17. Brake board of a back brake
   15.18. Protective casing of a forward brake disk
   15.19. Main brake cylinder
   15.20. Repair of the main brake cylinder (model without ABS)
   15.21. Vacuum amplifier of brakes
   15.22. Hydraulic ABS modulator
   15.23. The ABS sensors established on wheels
   15.24. ABS control unit
   15.25. ABS relay (only ABS-2E system)
   15.26. Valves of adjustment of pressure
   15.27. Brake pipelines and hoses
   15.28. Adjustment of the hand brake
   + 15.29. Cable of the hand brake
   15.30. Lever of the hand brake
   15.31. Brake pedal
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



15.31. Brake pedal

Removal

Arrangement of a spring bracket of the sharnirny finger, fixing a fork of draft of the vacuum amplifier of brakes to a brake pedal

The brake pedal which has been removed from the car
1–blocking bracket;
2–returnable spring of a pedal;
3–sharnirny finger of a pedal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Remove the bottom furnish of the dashboard in deepening for feet of the driver.
3. Disconnect the electric socket from the stoplight switch, then counter-clockwise unscrew the switch and take it from an arm.
4. Remove a spring bracket on the right side of the sharnirny finger, fixing a fork of draft of the vacuum amplifier of brakes to a brake pedal (see fig. An arrangement of a spring bracket of the sharnirny finger, fixing a fork of draft of the vacuum amplifier of brakes to a brake pedal).
5. Using flat-nose pliers, remove the end of a returnable spring from a pedal of a brake and take the sharnirny finger, fixing a fork of draft of the vacuum amplifier of brakes to a brake pedal (see fig. The brake pedal which has been removed from the car).
6. Remove a blocking bracket from the left end of a sharnirny finger of a pedal.
7. Since the left end of a sharnirny finger unscrew a nut and take a sharnirny finger from an arm of a pedal of a brake. Remove washers from a sharnirny finger of a pedal of a brake and note their arrangement.
8. Remove a pedal together with a returnable spring.

Installation

Installation is made in sequence, return to removal taking into account the next moments...

PERFORMANCE ORDER
1. Before installation of a pedal of a brake check correctness of an arrangement of a returnable spring.
2. Apply a thin film greasings on the basis of a molybdenum disulfide on a sharnirny finger of a pedal of a brake.
3. Check that washers on a sharnirny finger of a pedal of a brake are established, as well as before removal.