Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
- 16. Suspension bracket
   16.2. General information
   16.3. Replacement of the bearing of a forward wheel
   16.4. Forward bottom frame
   16.5. Rack of a forward suspension bracket
   16.6. Bottom lever of a forward suspension bracket
   16.7. Replacement of plugs of the bottom lever of a forward suspension bracket
   16.8. Spherical hinge of the bottom lever of a forward suspension bracket
   16.9. Forward stabilizer of cross-section stability
   16.10. Replacement of plugs of the forward stabilizer cross-section устойчи vost
   16.11. Adjustment of the bearing of a back wheel (SOHC model)
   16.12. Replacement of the bearing of a back wheel (the SOHC model till 1993)
   16.13. Replacement of the bearing of a nave of a back wheel (model since 1993)
   16.14. A nave of a back wheel (model with the SOHC engine)
   16.15. Back shock-absorber
   16.16. Replacement of rubber elements of fastening of the back shock-absorber
   16.17. Springs of a back suspension bracket (SOHC model)
   16.18. Knot of longitudinal levers of a back suspension bracket (model with SOHC engines)
   16.19. Back stabilizer of cross-section stability
   16.20. Replacement of the plug of the longitudinal lever of a back suspension bracket
   16.21. A fixing element of a back nave (model with SOHC engines)
   16.22. Check of system of a being self-leveled back suspension bracket
   16.23. Control system elements being self-leveled a back suspension bracket
   16.24. Replacement of the bearing of a back wheel (model with DOHC engines)
   16.25. A nave of a back wheel (model with DOHC engines)
   16.26. Knot of a back suspension bracket (model with DOHC engines)
   16.27. The diagonal lever of a back suspension bracket (model with DOHC engines)
   16.28. Back stabilizer of cross-section stability
   16.29. Steering wheel
   16.30. Centering of a steering wheel
   16.31. Replacement of the elastic coupling of a shaft of steering transfer
   16.32. Steering column
   16.33. Repair of a steering column
   16.34. Shock-absorber of steering transfer
   + 16.35. Replacement of protective casings of steering transfer
   16.36. Air removal from steering system with the amplifier
   16.37. Pump of the amplifier of a steering
   16.38. Popolnitelny tank of system of the amplifier of a steering
   16.39. Pipes of cooling of liquid of the amplifier of a steering
   16.40. Tips of steering draft
   16.41. Steering draft
   16.42. Corners of installation of forward wheels
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



16.28. Back stabilizer of cross-section stability
(models with DOHC engines)

Removal

Elements of fastening of the back stabilizer of cross-section stability on models from the engine ми DOHC
1–earring;

2–arm


PERFORMANCE ORDER
1. Lift a back part of the car and fix on supports.
2. Working under the car, remove brackets and take brake tubes from arms from two parties of the bottom of the car. Keep in mind that on brackets which brake tubes fix, wires of ABS sensors are fixed.
3. Disconnect submitting fuel hose from the fuel filter which is located on the right side on the car bottom before a fuel tank. Close openings in the filter and a hose suitable jams.
4. Support a jack a back cross-section beam and unscrew two bolts, fixing it.
5. For access to arms of fastening of the stabilizer of cross-section stability to a back beam, being careful, lower a jack, thus do not stretch hoses, tubes and электричес a wire cue.
6. Unscrew nuts and remove earrings of the stabilizer of cross-section stability from diagonal levers. Remove rubber pillows and rasporny plugs.
7. Unscrew two bolts, fixing arms of the stabilizer of cross-section stability to a back beam and take the stabilizer from under the car (see drawing).
8. If necessary remove earrings, having simply pulled together them from the stabilizer.
9. Check a condition of adjusting plugs of the stabilizer of cross-section stability and if necessary, replace them.
10. If necessary replace plugs on stabilizer earrings.
11. For removal of adjusting plugs pull together them on the stabilizer after earring removal. Before installation new plugs moisten with soap water.

Installation

PERFORMANCE ORDER
1. Establish the stabilizer of cross-section stability under a back part of the car and fix stabilizer earrings.
2. Establish the arms, fixing the stabilizer of cross-section stability to a back beam and fix bolts, having tightened them the demanded moment.
3. Being careful, lift a jack supporting a back cross-section beam, then screw in the bolts, fixing a beam to the bottom of the car and tighten them the demanded moment.
4. Connect submitting hose to the fuel filter and fix it a collar.
5. Establish brake tubes in arms on the bottom of the car and fix them brackets.
6. Lower the car on the earth.