Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
- 16. Suspension bracket
   16.2. General information
   16.3. Replacement of the bearing of a forward wheel
   16.4. Forward bottom frame
   16.5. Rack of a forward suspension bracket
   16.6. Bottom lever of a forward suspension bracket
   16.7. Replacement of plugs of the bottom lever of a forward suspension bracket
   16.8. Spherical hinge of the bottom lever of a forward suspension bracket
   16.9. Forward stabilizer of cross-section stability
   16.10. Replacement of plugs of the forward stabilizer cross-section устойчи vost
   16.11. Adjustment of the bearing of a back wheel (SOHC model)
   16.12. Replacement of the bearing of a back wheel (the SOHC model till 1993)
   16.13. Replacement of the bearing of a nave of a back wheel (model since 1993)
   16.14. A nave of a back wheel (model with the SOHC engine)
   16.15. Back shock-absorber
   16.16. Replacement of rubber elements of fastening of the back shock-absorber
   16.17. Springs of a back suspension bracket (SOHC model)
   16.18. Knot of longitudinal levers of a back suspension bracket (model with SOHC engines)
   16.19. Back stabilizer of cross-section stability
   16.20. Replacement of the plug of the longitudinal lever of a back suspension bracket
   16.21. A fixing element of a back nave (model with SOHC engines)
   16.22. Check of system of a being self-leveled back suspension bracket
   16.23. Control system elements being self-leveled a back suspension bracket
   16.24. Replacement of the bearing of a back wheel (model with DOHC engines)
   16.25. A nave of a back wheel (model with DOHC engines)
   16.26. Knot of a back suspension bracket (model with DOHC engines)
   16.27. The diagonal lever of a back suspension bracket (model with DOHC engines)
   16.28. Back stabilizer of cross-section stability
   16.29. Steering wheel
   16.30. Centering of a steering wheel
   16.31. Replacement of the elastic coupling of a shaft of steering transfer
   16.32. Steering column
   16.33. Repair of a steering column
   16.34. Shock-absorber of steering transfer
   + 16.35. Replacement of protective casings of steering transfer
   16.36. Air removal from steering system with the amplifier
   16.37. Pump of the amplifier of a steering
   16.38. Popolnitelny tank of system of the amplifier of a steering
   16.39. Pipes of cooling of liquid of the amplifier of a steering
   16.40. Tips of steering draft
   16.41. Steering draft
   16.42. Corners of installation of forward wheels
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



16.29. Steering wheel

GENERAL INFORMATION

Prevention

For removal of a steering wheel it is necessary to use a stripper.

If on the car the safety cushion is established, before the beginning of work read the prevention (see subsection 18.57).


Removal

Disconnect the electric socket from the button of a sound signal

Bending back of uvulas of the fixing washer, fixing a nut of a steering wheel

Stripper use for removal of a steering wheel

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Establish forward wheels of the car for movement directly forward.
3. Using a screw-driver edge as the lever, remove from the central part of a steering wheel the button of a sound signal and disconnect from it the electric socket (see fig. Disconnect the electric socket from the button of a sound signal).
4. A screw-driver unbend uvulas of a fixing washer which fixes a nut of a steering wheel from unscrewing (see fig. Bending back of uvulas of the fixing washer, fixing a nut of a steering wheel).
5. Unscrew a nut of a steering wheel and remove fixing washer.
6. Put combination labels on a steering wheel and an end face of a steering shaft.
7. Using a stripper, remove a steering wheel from a steering shaft (see fig. Stripper use for removal of a steering wheel).

Installation

PERFORMANCE ORDER
1. Combine adjusting labels and in easy blows of a kiyanka establish a steering wheel on a steering shaft. Check centering of a steering wheel.
2. Establish fixing washer and screw a nut of fastening of a steering wheel and tighten it the demanded moment. For nut fixing from unscrewing bend uvulas of a fixing washer.
3. Connect the electric socket and establish the button of a sound signal. Connect a weight wire to the accumulator.