Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures at carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cable of the lock of a cowl
   17.10. Trunk lid (Sedan models)
   17.11. Lock of a trunk lid (Sedan model)
   17.12. Cylinder of the lock of a trunk lid (Sedan model)
   17.13. Back door (Hatchback models)
   17.14. Lock of a back door (Hatchback model)
   17.15. Cylinder of the lock of a back door (Hatchback model)
   17.16. Racks of a back door (Hatchback model)
   17.17. Doors
   17.18. Door upholstery
   17.19. Internal handle of opening of a door
   17.20. External handle of opening of a door
   17.21. Cylinder of the lock of a door
   17.22. Door lock
   17.23. Limiter of opening of a door
   17.24. Wind and back flew down
   17.25. Back triangular window leaves
   17.26. Door glass
   17.27. Window regulators
   17.28. External rear-view mirror
   17.29. Bumpers
   17.30. Front grille
   17.31. Windscreen deflector
   17.32. Loose leaves of an arch of a wheel
   17.33. Bottom protective plate (mudguard) of the engine
   17.34. Folding shutter of a toplivozalivny mouth of a fuel tank
   + 17.35. Hatch elements
   17.36. Interior furnish
   + 17.37. Panels of furnish of the dashboard
   17.38. Central console
   17.39. Ceiling
   17.40. Sitting (without mechanisms of a tension of seat belts)
   17.41. Seat belts
   17.42. Mechanism of a tension of a seat belt
   17.43. Forward sitting with the mechanism of a tension of a seat belt
+ 18. Electric equipment
+ 19. Check of malfunctions



17.10. Trunk lid (Sedan models)

Removal

Arrangement of a spring of support of a trunk lid on the Sedan models

1–the provision of a spring for a standard trunk lid;
2–the provision of a spring for a cover with the external plastic panel or a spoiler;
3–situation for a trunk lid spring with the external plastic panel and a spoiler


PERFORMANCE ORDER
1. Open a trunk lid.
2. On models with the central lock remove a weight wire from the accumulator, then disconnect the electric socket from the traction relay of the lock. Adhere by the electroconducting end a thin long cord and, having extended electroconducting from a trunk lid, leave a cord in a luggage carrier.
3. Using a marker, note position of hinges on a trunk lid.
4. Having the assistant, support a trunk lid, then unscrew bolts of fastening of hinges and uncover a luggage carrier the car.
5. At installation of a new trunk lid remove with old all demountable details and establish on a new trunk lid.
6. If necessary, note an arrangement and remove springs of support of a trunk lid (see drawing).

Installation

Installation is made in sequence, return to removal taking into account the next moments...

PERFORMANCE ORDER
1. Establish trunk lid hinges according to earlier made labels. At existence, for a thin cord involve electroconducting of the traction relay in a trunk lid.
2. Check that in a closed position a gap between a trunk lid and elements of a body of the car everywhere the identical. If necessary adjust the provision of a trunk lid for what weaken bolts of fastening and, moving a cover in repartitions of the extended openings of installation, find demanded situation.