Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures at carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cable of the lock of a cowl
   17.10. Trunk lid (Sedan models)
   17.11. Lock of a trunk lid (Sedan model)
   17.12. Cylinder of the lock of a trunk lid (Sedan model)
   17.13. Back door (Hatchback models)
   17.14. Lock of a back door (Hatchback model)
   17.15. Cylinder of the lock of a back door (Hatchback model)
   17.16. Racks of a back door (Hatchback model)
   17.17. Doors
   17.18. Door upholstery
   17.19. Internal handle of opening of a door
   17.20. External handle of opening of a door
   17.21. Cylinder of the lock of a door
   17.22. Door lock
   17.23. Limiter of opening of a door
   17.24. Wind and back flew down
   17.25. Back triangular window leaves
   17.26. Door glass
   17.27. Window regulators
   17.28. External rear-view mirror
   17.29. Bumpers
   17.30. Front grille
   17.31. Windscreen deflector
   17.32. Loose leaves of an arch of a wheel
   17.33. Bottom protective plate (mudguard) of the engine
   17.34. Folding shutter of a toplivozalivny mouth of a fuel tank
   + 17.35. Hatch elements
   17.36. Interior furnish
   + 17.37. Panels of furnish of the dashboard
   17.38. Central console
   17.39. Ceiling
   17.40. Sitting (without mechanisms of a tension of seat belts)
   17.41. Seat belts
   17.42. Mechanism of a tension of a seat belt
   17.43. Forward sitting with the mechanism of a tension of a seat belt
+ 18. Electric equipment
+ 19. Check of malfunctions



17.17. Doors

FORWARD DOOR

Removal

Detachment of the electric socket from a forward end face of a door

PERFORMANCE ORDER
1. Hinges of a door are welded on a door and a body rack.
2. Prop up a door supports or jacks, having laid between them and a door pure rags.
3. If at doors there are electric drives, remove a weight wire from the accumulator and disconnect the electric socket from a forward end face of a door. For a detachment of the electric socket unscrew an external ring of the socket and take the socket (see drawing).
4. Using a punch, beat out a cylindrical pin of a rotary axis of the limiter of opening of a door.
5. Remove plastic covers from sharnirny fingers of a door. A drift beat out sharnirny fingers and remove a door.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. At installation use a new cylindrical pin of fastening of the limiter of opening of a door.
2. Because hinges of a door are welded on a door and a rack, therefore in need of adjustment use special tools to bend hinges.
3. Check that the door lock accurately comes on the shock plate located on a rack. If adjustment is necessary, weaken the screws, fixing a shock plate, move a shock plate and tighten fastening screws.

BACK DOOR

Operation on removal and installation of a back door is similar to operation on removal and installation of a forward door. However on models with the central lock or electric window regulators remove a door upholstery, disconnect electric sockets and take them through a forward end face of a door.