Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures at carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cable of the lock of a cowl
   17.10. Trunk lid (Sedan models)
   17.11. Lock of a trunk lid (Sedan model)
   17.12. Cylinder of the lock of a trunk lid (Sedan model)
   17.13. Back door (Hatchback models)
   17.14. Lock of a back door (Hatchback model)
   17.15. Cylinder of the lock of a back door (Hatchback model)
   17.16. Racks of a back door (Hatchback model)
   17.17. Doors
   17.18. Door upholstery
   17.19. Internal handle of opening of a door
   17.20. External handle of opening of a door
   17.21. Cylinder of the lock of a door
   17.22. Door lock
   17.23. Limiter of opening of a door
   17.24. Wind and back flew down
   17.25. Back triangular window leaves
   17.26. Door glass
   17.27. Window regulators
   17.28. External rear-view mirror
   17.29. Bumpers
   17.30. Front grille
   17.31. Windscreen deflector
   17.32. Loose leaves of an arch of a wheel
   17.33. Bottom protective plate (mudguard) of the engine
   17.34. Folding shutter of a toplivozalivny mouth of a fuel tank
   + 17.35. Hatch elements
   17.36. Interior furnish
   + 17.37. Panels of furnish of the dashboard
   17.38. Central console
   17.39. Ceiling
   17.40. Sitting (without mechanisms of a tension of seat belts)
   17.41. Seat belts
   17.42. Mechanism of a tension of a seat belt
   17.43. Forward sitting with the mechanism of a tension of a seat belt
+ 18. Electric equipment
+ 19. Check of malfunctions



17.20. External handle of opening of a door

FORWARD DOOR

Removal

PERFORMANCE ORDER
1. Remove a door upholstery.
2. From the interior of a door remove a protective film for access to the external handle of opening of a door.
3. Unscrew two nuts which fix the external handle to a door.
4. On models with the central lock disconnect the microswitch from a back part of the external handle of a door.
5. Disconnect drafts from the external handle, then remove the handle from the outer side of a door.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. Check operation of the external handle of opening of a door, then establish a door upholstery.

BACK DOOR

Removal

PERFORMANCE ORDER
1. Completely lower glass.
2. Remove a door upholstery.
3. From the interior of a door remove a protective film for access to the external handle of opening of a door.
4. Remove consolidation back directing glasses, then unscrew the opened screw, fixing back directing glasses.
5. Unscrew the second screw of fastening back directing glasses access to which is possible from the interior of a door, then remove directing glasses from a door.
6. Through an aperture in a back part of a door remove a plastic casing of the door lock.
7. In an end face of a back door unscrew three bolts, fixing the lock of a back door to a door and lower the lock in a door.
8. Unscrew two nuts which fix the external handle of opening of a door to a door.
9. Remove the handle from the outer side of a door and disconnect from it drafts.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. Before installation of an upholstery of a door check operation of the lock of a door, handles and the mechanism of window regulators.