Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures at carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cable of the lock of a cowl
   17.10. Trunk lid (Sedan models)
   17.11. Lock of a trunk lid (Sedan model)
   17.12. Cylinder of the lock of a trunk lid (Sedan model)
   17.13. Back door (Hatchback models)
   17.14. Lock of a back door (Hatchback model)
   17.15. Cylinder of the lock of a back door (Hatchback model)
   17.16. Racks of a back door (Hatchback model)
   17.17. Doors
   17.18. Door upholstery
   17.19. Internal handle of opening of a door
   17.20. External handle of opening of a door
   17.21. Cylinder of the lock of a door
   17.22. Door lock
   17.23. Limiter of opening of a door
   17.24. Wind and back flew down
   17.25. Back triangular window leaves
   17.26. Door glass
   17.27. Window regulators
   17.28. External rear-view mirror
   17.29. Bumpers
   17.30. Front grille
   17.31. Windscreen deflector
   17.32. Loose leaves of an arch of a wheel
   17.33. Bottom protective plate (mudguard) of the engine
   17.34. Folding shutter of a toplivozalivny mouth of a fuel tank
   + 17.35. Hatch elements
   17.36. Interior furnish
   + 17.37. Panels of furnish of the dashboard
   17.38. Central console
   17.39. Ceiling
   17.40. Sitting (without mechanisms of a tension of seat belts)
   17.41. Seat belts
   17.42. Mechanism of a tension of a seat belt
   17.43. Forward sitting with the mechanism of a tension of a seat belt
+ 18. Electric equipment
+ 19. Check of malfunctions



17.22. Door lock

FORWARD DOOR

Removal

The lock and the handle of opening of a door assembled removed from a door

Removal of the lock from a door on models with the central lock

PERFORMANCE ORDER
1. Remove a door upholstery.
2. Unscrew a back fixing bracket of an upholstery of a door and remove a protective film from a back part of a door.
3. Through apertures at doors disconnect drafts from internal and external handles (see fig. The lock and the handle of opening of a door assembled removed from a door).
4. Through the bottom doorway remove a plastic casing from the lock.
5. On models with the central lock half lower window glass. Remove a weight wire from the accumulator and through the bottom aperture at doors disconnect the electric socket from a drive of the central lock.
6. In an end face of a door unscrew three bolts, fixing the lock to a door. Take the lock together with the engine of the central lock and draft through the bottom doorway (see fig. Removal of the lock from a door on models with the central lock).

Installation

Arrangement of an adjusting wheel of draft of the external handle of a door

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. Check operation of the lock of a door, handles and the window regulator mechanism before installation of an upholstery of a door. If the lock works insufficiently accurately, keep in mind that the draft connecting the external handle to the lock, can be adjusted, for what it is necessary to turn a plastic adjusting wheel on the draft end (see fig. Arrangement of an adjusting wheel of draft of the external handle of a door).

BACK DOOR

Removal

PERFORMANCE ORDER
1. Completely lower window glass, then remove an upholstery of a door and a protective film.
2. Through an aperture at doors disconnect drafts from internal and external handles and the button of blocking of the lock.
3. Remove consolidation of the back I direct glass Russian cabbage soup, then unscrew the opened screw, fixing back directing glasses.
4. Unscrew the second screw of fastening back directing glasses access to which is possible from the interior of a door, then remove directing glasses from a door.
5. Through an aperture in a back part of a door remove a plastic casing of the door lock.
6. On models with the central lock remove a weight wire from the accumulator and disconnect the electric socket from a drive of the central lock.
7. In an end face of a back door unscrew three bolts, fixing the lock to a door. Take the lock together with a drive of the central lock and draft through the bottom doorway.

Installation

PERFORMANCE ORDER

1. Installation is made in sequence, return to removal.

2. Check operation of the lock of a door, handles and the window regulator mechanism before installation of an upholstery of a door. If the lock works insufficiently accurately, keep in mind that the draft connecting the external handle to the lock, can be adjusted, for what it is necessary to turn a plastic adjusting wheel on the draft end.