Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures at carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cable of the lock of a cowl
   17.10. Trunk lid (Sedan models)
   17.11. Lock of a trunk lid (Sedan model)
   17.12. Cylinder of the lock of a trunk lid (Sedan model)
   17.13. Back door (Hatchback models)
   17.14. Lock of a back door (Hatchback model)
   17.15. Cylinder of the lock of a back door (Hatchback model)
   17.16. Racks of a back door (Hatchback model)
   17.17. Doors
   17.18. Door upholstery
   17.19. Internal handle of opening of a door
   17.20. External handle of opening of a door
   17.21. Cylinder of the lock of a door
   17.22. Door lock
   17.23. Limiter of opening of a door
   17.24. Wind and back flew down
   17.25. Back triangular window leaves
   17.26. Door glass
   17.27. Window regulators
   17.28. External rear-view mirror
   17.29. Bumpers
   17.30. Front grille
   17.31. Windscreen deflector
   17.32. Loose leaves of an arch of a wheel
   17.33. Bottom protective plate (mudguard) of the engine
   17.34. Folding shutter of a toplivozalivny mouth of a fuel tank
   + 17.35. Hatch elements
   17.36. Interior furnish
   + 17.37. Panels of furnish of the dashboard
   17.38. Central console
   17.39. Ceiling
   17.40. Sitting (without mechanisms of a tension of seat belts)
   17.41. Seat belts
   17.42. Mechanism of a tension of a seat belt
   17.43. Forward sitting with the mechanism of a tension of a seat belt
+ 18. Electric equipment
+ 19. Check of malfunctions



17.28. External rear-view mirror

REPLACEMENT FLEW DOWN

Removal of glass of a mirror with electric management of a mirror

PERFORMANCE ORDER
1. Replacement of glass of a mirror can be made without removal of a mirror from the car. On models with electric management of mirrors remove a weight wire from the accumulator.
2. Using a screw-driver edge as the lever and being careful, remove mirror glass from the spherical hinge and at existence disconnect the electric socket of a heater from glass. Be careful not to break glass (see fig. Removal of glass of a mirror with electric management of a mirror).
3. At installation connect the electric socket and simply establish a mirror on the spherical hinge.

REMOVAL AND MIRROR INSTALLATION

Removal of a decorative overlay of a mirror from the interior of a door

Unscrewing of the screw of fastening of a mirror

Detachment электричес whom socket of a drive of a mirror

Consolidation arrangement on the mirror case

PERFORMANCE ORDER
1. On models with an electric drive of mirrors remove a weight wire from the accumulator.
2. On models with manual adjustment of mirrors remove the lever of adjustment of a mirror.
3. Using a screw-driver edge as the lever, from the interior of a door remove a decorative overlay of a mirror (see fig. Removal of a decorative overlay of a mirror from the interior of a door).
4. Unscrew three screws of fastening and remove a mirror from a door. On models with электричес Kim a drive of a mirror disconnect the electric socket (see fig. Unscrewing of the screw of fastening of a mirror, Detachment электричес whom socket of a drive of a mirror).
5. Installation is made in sequence, return to removal, but thus check correctness of an arrangement of rubber consolidation on the mirror case (see fig. A consolidation arrangement on the mirror case).

REMOVAL AND INSTALLATION OF THE ELECTRIC MOTOR OF THE DRIVE OF THE MIRROR

Removal

Arrangement of screws of fastening of the electric motor of a mirror

PERFORMANCE ORDER
1. Remove mirror glass.
2. Unscrew three screws, mirrors fixing the electric motor, then disconnect the electric socket and remove the electric motor (see fig. Arrangement of screws of fastening of the electric motor of a mirror).

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal, but thus check that electroconducting of the engine is located behind the engine.