Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures at carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cable of the lock of a cowl
   17.10. Trunk lid (Sedan models)
   17.11. Lock of a trunk lid (Sedan model)
   17.12. Cylinder of the lock of a trunk lid (Sedan model)
   17.13. Back door (Hatchback models)
   17.14. Lock of a back door (Hatchback model)
   17.15. Cylinder of the lock of a back door (Hatchback model)
   17.16. Racks of a back door (Hatchback model)
   17.17. Doors
   17.18. Door upholstery
   17.19. Internal handle of opening of a door
   17.20. External handle of opening of a door
   17.21. Cylinder of the lock of a door
   17.22. Door lock
   17.23. Limiter of opening of a door
   17.24. Wind and back flew down
   17.25. Back triangular window leaves
   17.26. Door glass
   17.27. Window regulators
   17.28. External rear-view mirror
   17.29. Bumpers
   17.30. Front grille
   17.31. Windscreen deflector
   17.32. Loose leaves of an arch of a wheel
   17.33. Bottom protective plate (mudguard) of the engine
   17.34. Folding shutter of a toplivozalivny mouth of a fuel tank
   - 17.35. Hatch elements
      17.35.2. Gutter
      17.35.3. Sun-protection screen
      17.35.4. Crank drive
   17.36. Interior furnish
   + 17.37. Panels of furnish of the dashboard
   17.38. Central console
   17.39. Ceiling
   17.40. Sitting (without mechanisms of a tension of seat belts)
   17.41. Seat belts
   17.42. Mechanism of a tension of a seat belt
   17.43. Forward sitting with the mechanism of a tension of a seat belt
+ 18. Electric equipment
+ 19. Check of malfunctions



17.35. Hatch elements

17.35.1. Glass panel of the hatch

Removal

Unscrewing of four screws of fastening of a frame of the directing

Removal of a plastic frame of the directing

Removal of decorative plastic furnish from the directing

Unscrewing of screws of fastening of the glass panel of the hatch

Removal of the glass panel of the hatch from a car roof

PERFORMANCE ORDER
1. Move the sun-protection screen completely back and half open the glass panel of the hatch.
2. From the forward party unscrew four screws, fixing a plastic frame directing and remove it down through a hatch aperture (see fig. Unscrewing of four screws of fastening of a frame directing, Removal of a plastic frame directing).
3. Move the glass panel of the hatch forward and establish it in inclined situation.
4. Remove decorative plastic strips of furnish from the directing. Screws of fastening of glass (see fig. thus will open. Removal of decorative plastic furnish with directing).
5. Unscrew on three screws with everyone directing and remove spring cutting washers (see fig. Unscrewing of screws of fastening of the glass panel of the hatch).
Being careful, remove the glass panel of the hatch from a car roof (see fig. Removal of the glass panel of the hatch from a car roof).

Installation

Adjusting sizes of a flange of the glass panel of the hatch
1–adjusting flange;
2–nut;
3–protective foil;
A-and – a cut

the sizes in millimeters

Adjusting position of the glass panel of the hatch

Installation is made in sequence, return to removal taking into account the next moments...

PERFORMANCE ORDER
1. Before installation of the glass panel of the hatch measure distance between rising adjusting flanges. If necessary turn in flanges (see fig. Adjusting sizes of a flange of the glass panel of the hatch).
2. Check that cutting spring washers of screws of fastening of the glass panel of the hatch coincide with adjusting pins.
3. Before a final tightening of screws of fastening of the glass panel of the hatch close the panel and adjust its situation according to fig. Adjusting position of the glass panel of the hatch.
4. At installation of the new glass panel of the hatch after carrying out adjustment remove a protective foil.
5. Be careful, that at installation not to damage a plastic frame of the directing.