Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures at carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cable of the lock of a cowl
   17.10. Trunk lid (Sedan models)
   17.11. Lock of a trunk lid (Sedan model)
   17.12. Cylinder of the lock of a trunk lid (Sedan model)
   17.13. Back door (Hatchback models)
   17.14. Lock of a back door (Hatchback model)
   17.15. Cylinder of the lock of a back door (Hatchback model)
   17.16. Racks of a back door (Hatchback model)
   17.17. Doors
   17.18. Door upholstery
   17.19. Internal handle of opening of a door
   17.20. External handle of opening of a door
   17.21. Cylinder of the lock of a door
   17.22. Door lock
   17.23. Limiter of opening of a door
   17.24. Wind and back flew down
   17.25. Back triangular window leaves
   17.26. Door glass
   17.27. Window regulators
   17.28. External rear-view mirror
   17.29. Bumpers
   17.30. Front grille
   17.31. Windscreen deflector
   17.32. Loose leaves of an arch of a wheel
   17.33. Bottom protective plate (mudguard) of the engine
   17.34. Folding shutter of a toplivozalivny mouth of a fuel tank
   + 17.35. Hatch elements
   17.36. Interior furnish
   + 17.37. Panels of furnish of the dashboard
   17.38. Central console
   17.39. Ceiling
   17.40. Sitting (without mechanisms of a tension of seat belts)
   17.41. Seat belts
   17.42. Mechanism of a tension of a seat belt
   17.43. Forward sitting with the mechanism of a tension of a seat belt
+ 18. Electric equipment
+ 19. Check of malfunctions



17.36. Interior furnish

ELEMENTS OF FURNISH OF THE INTERIOR

Elements of furnish of an interior fasten screws or various type brackets.

Removal

Use of the special tool for extraction of a clamp of fastening of an upholstery

PERFORMANCE ORDER
1. Before removal of an element of furnish of an interior check that it is not held by other element of furnish imposed on it.
2. First of all unscrew visible screws of fastening of an element of furnish of an interior. If after that the element of furnish of salon does not act in film, means, it is held by the hidden brackets or clamps. Brackets or clamps usually settle down on perimeter of an element of furnish and their office is necessary for making by means of a wide flat edge of a screw-driver or using the special flat tool in the form of a dvukhzuby fork (see fig. Use of the special tool for extraction of a clamp of fastening of an upholstery).
3. For installation it is necessary to combine a clamp with an opening and having pressed the panel of furnish of an interior accurately to fix it in an opening.

PANELS OF FURNISH OF THRESHOLDS

Removal

Removal of the panel of furnish of thresholds

PERFORMANCE ORDER
1. On the models equipped with ABS, working from the passenger, unscrew three screws and uncover the ABS control unit. Keep in mind that two screws are closed by plastic caps.
2. For removal of the panel of furnish of thresholds simply pull it up. Thus clamps leave openings in a floor (see fig. льзуя the special flat tool in the form of a dvukhzuby fork (see fig. Removal of the panel of furnish of thresholds).

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.

THE LATERAL PANEL IN DEEPENING FOR FEET

Removal

Removal of the lateral panel in deepening for feet

PERFORMANCE ORDER
1. Remove the forward end of the panel of furnish of a threshold.
2. Remove the lateral panel of furnish in deepening for feet (see fig. льзуя the special flat tool in the form of a dvukhzuby fork (see fig. Removal of the lateral panel in deepening for feet).

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.

PANEL OF FURNISH OF THE FORWARD RACK

Removal

PERFORMANCE ORDER
1. Having pulled, remove the panel of furnish of a forward rack, six clamps will thus be released.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.

PANEL OF FURNISH OF THE CENTRAL RACK

Removal

Removal of consolidation of doors from the central rack

Removal of the bottom panel of furnish of the central rack

PERFORMANCE ORDER
1. Remove the panel of furnish of a threshold.
2. Remove consolidation of doors from two parties of the central rack (see fig. Removal of consolidation of doors from the central rack)
3. Having pulled on itself, remove the bottom panel of furnish of the central rack (see fig. Removal of the bottom panel of furnish of the central rack).
4. Remove a decorative slip from a bolt of the top fastening of a seat belt. Unscrew a bolt of the top fastening of a seat belt and remove the top furnish of the central rack.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.

PANEL OF FURNISH OF A BACK QUARTER

Removal

Removal of the top panel of furnish of a back quarter on the Hatchback models

Removal of the rubber limiter from a sitting latch

Removal of the panel of furnish of the bottom back quarter on the Hatchback models

PERFORMANCE ORDER
1. Remove a decorative slip and unscrew a bolt of the top fastening of a seat belt.
2. Remove consolidation of a back door from a back rack. On the Hatchback models remove the shelf.
3. Unscrew the screws, furnish of a back quarter fixing the panel to a body. For access to a part from screws on the Hatchback models open a cover of a first-aid kit/sign of an emergency stop in a luggage carrier.
4. Being careful, remove the top panel of furnish of a back quarter (see fig. Removal of the top panel of furnish of a back quarter on the Hatchback models). At existence disconnect wires from a loudspeaker.
5. After removal of the top panel of furnish of a back quarter it is possible to remove the bottom panel of furnish.
6. Depending on model the bottom panel of furnish of a back quarter can fasten screws, nuts and brackets. Removal and installation of the panel of furnish of the bottom back quarter does not present difficulty. Keep in mind that the rubber limiter of a latch of a seat should be removed before removal of the bottom back panel of furnish (see fig. Removal of the rubber limiter from a sitting latch, Removal of the panel of furnish of the bottom back quarter on the Hatchback models).

PANEL OF FURNISH OF THE BACK PART OF THE LUGGAGE COMPARTMENT

Removal

PERFORMANCE ORDER
1. Having pulled, remove the panel of furnish of a back part of a luggage compartment. Clamps will thus be released.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.

THE PANEL OF FURNISH OF THE BACK PART OF THE DOOR ON MODELS HECHBEK

The panel of furnish of a back door on the Hatchback models is attached by screws. Removal and installation of the panel of furnish does not present difficulty.