Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures at carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cable of the lock of a cowl
   17.10. Trunk lid (Sedan models)
   17.11. Lock of a trunk lid (Sedan model)
   17.12. Cylinder of the lock of a trunk lid (Sedan model)
   17.13. Back door (Hatchback models)
   17.14. Lock of a back door (Hatchback model)
   17.15. Cylinder of the lock of a back door (Hatchback model)
   17.16. Racks of a back door (Hatchback model)
   17.17. Doors
   17.18. Door upholstery
   17.19. Internal handle of opening of a door
   17.20. External handle of opening of a door
   17.21. Cylinder of the lock of a door
   17.22. Door lock
   17.23. Limiter of opening of a door
   17.24. Wind and back flew down
   17.25. Back triangular window leaves
   17.26. Door glass
   17.27. Window regulators
   17.28. External rear-view mirror
   17.29. Bumpers
   17.30. Front grille
   17.31. Windscreen deflector
   17.32. Loose leaves of an arch of a wheel
   17.33. Bottom protective plate (mudguard) of the engine
   17.34. Folding shutter of a toplivozalivny mouth of a fuel tank
   + 17.35. Hatch elements
   17.36. Interior furnish
   + 17.37. Panels of furnish of the dashboard
   17.38. Central console
   17.39. Ceiling
   17.40. Sitting (without mechanisms of a tension of seat belts)
   17.41. Seat belts
   17.42. Mechanism of a tension of a seat belt
   17.43. Forward sitting with the mechanism of a tension of a seat belt
+ 18. Electric equipment
+ 19. Check of malfunctions



17.40. Sitting (without mechanisms of a tension of seat belts)

FORWARD SITTING

Removal

Removal of an external decorative slip directing sitting

Removal of furnish from a back part internal directing sitting

Vyvinchivaniye and removal of a bolt of fastening directing forward sitting to a floor

PERFORMANCE ORDER
1. Unscrew the fastening screw from the forward party of an external decorative slip directing sitting, then remove a slip (see fig. Removal of an external decorative slip directing sitting).
2. Remove furnish from a back part internal directing sitting (see fig. Removal of furnish from a back part internal directing sitting).
3. Unscrew four bolts, fixing directing sitting to a floor, then remove sitting together with directing (see Vyvinchivaniye's fig. and removal of a bolt of fastening directing forward sitting to a floor).
4. If necessary remove I direct shchy from sitting.

Installation

It is recommended to use new bolts of fastening directing sitting to a floor.

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.

PILLOW OF BACK SITTING (EARLY MODELS)

Removal

Extraction of a sharnirny finger of fastening of a pillow of back sitting on models with SOHC engines

PERFORMANCE ORDER
1. Lift a back part of a pillow of sitting and move it forward for access to sharnirny fingers from the forward party of a pillow of back sitting.
2. Remove a lock ring from a sharnirny finger and take a sharnirny finger (see fig. Extraction of a sharnirny finger of fastening of a pillow of back sitting on models with SOHC engines).
3. Take a pillow of back sitting from the car.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.

PILLOW OF BACK SITTING (LATE MODELS)

Removal

PERFORMANCE ORDER
1. Having pulled a pillow from two parties, release it from clamps and take from car salon.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.

BACK OF BACK SITTING (CONTINUOUS)

Removal

PERFORMANCE ORDER
1. Reject forward or remove a pillow of back sitting and incline forward a back of back sitting.
2. At existence unbend a uvula on the panel of a body and remove two rubber belts, fixing end faces of a back of sitting to the body panel.
3. Take percussion caps of fastening and move the furnish closing hinges on a back of back sitting.
4. Unscrew the screws, fixing hinges to a back of back sitting and take a back from car salon.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.

BACK OF BACK SITTING (SEPARATE)

Removal

Arrangement of the uvula, fixing a rubber belt of a back of back sitting

Unscrewing of the screw of fastening of the hinge to a back of back sitting

Arrangement of the central hinge of fastening of a back of back sitting

PERFORMANCE ORDER
1. Incline forward or remove a pillow of back sitting.
2. At existence unbend a uvula on the panel of a body and remove the rubber belt, fixing the corresponding half of a back of sitting to a body (see fig. An arrangement of the uvula, fixing a rubber belt of a back of back sitting).
3. Take percussion caps and move back the furnish closing hinges of a back of back sitting.
4. Unscrew the screws, fixing hinges to a back of back sitting (see fig. Unscrewing of the screw of fastening of the hinge to a back of back sitting).
5. In the central part of a back of back sitting wring out a sitting pillow from the central arm for access to a nut and a fastening bolt. Keep in mind that the bolt passes through two half of a back of back sitting (see fig. Arrangement of the central hinge of fastening of a back of back sitting).
Unscrew a nut and take a bolt and, being careful, remove a back of back sitting.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. Fix rubber belts of a back of back sitting by uvula bending back.