Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures at carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cable of the lock of a cowl
   17.10. Trunk lid (Sedan models)
   17.11. Lock of a trunk lid (Sedan model)
   17.12. Cylinder of the lock of a trunk lid (Sedan model)
   17.13. Back door (Hatchback models)
   17.14. Lock of a back door (Hatchback model)
   17.15. Cylinder of the lock of a back door (Hatchback model)
   17.16. Racks of a back door (Hatchback model)
   17.17. Doors
   17.18. Door upholstery
   17.19. Internal handle of opening of a door
   17.20. External handle of opening of a door
   17.21. Cylinder of the lock of a door
   17.22. Door lock
   17.23. Limiter of opening of a door
   17.24. Wind and back flew down
   17.25. Back triangular window leaves
   17.26. Door glass
   17.27. Window regulators
   17.28. External rear-view mirror
   17.29. Bumpers
   17.30. Front grille
   17.31. Windscreen deflector
   17.32. Loose leaves of an arch of a wheel
   17.33. Bottom protective plate (mudguard) of the engine
   17.34. Folding shutter of a toplivozalivny mouth of a fuel tank
   + 17.35. Hatch elements
   17.36. Interior furnish
   + 17.37. Panels of furnish of the dashboard
   17.38. Central console
   17.39. Ceiling
   17.40. Sitting (without mechanisms of a tension of seat belts)
   17.41. Seat belts
   17.42. Mechanism of a tension of a seat belt
   17.43. Forward sitting with the mechanism of a tension of a seat belt
+ 18. Electric equipment
+ 19. Check of malfunctions



17.41. Seat belts

SEAT BELT OF FORWARD SITTING

Removal

Unscrewing of a bolt of fastening of an inertial drum to the central rack

PERFORMANCE ORDER
1. Open a lobby and a back door and remove door consolidation from the central rack of a body.
2. Remove the bottom panel of furnish of the central rack for access to an inertial drum.
3. Unscrew a bolt and take an inertial drum of a seat belt from the central rack (see fig. Unscrewing of a bolt of fastening of an inertial drum to the central rack).
4. Remove a decorative slip and unscrew a bolt of the top fastening of a seat belt to a body rack.
5. Unscrew the bottom fastening of a seat belt and remove a seat belt assembled from the car.
If necessary unscrew from sitting the seat belt lock.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. If the mechanism of adjustment of height of the top fastening of a seat belt acted in film, establish it so that shooters were directed up.

BELT OF BACK SITTING

Removal

Arrangement of the bottom bolt of fastening of a back seat belt on the Hatchback models

Removal of the top fastening of a back seat belt from a body rack on the Hatchback models

Arrangement of an inertial drum of a back seat belt on the Hatchback models

Arrangement of bolts of fastening of a regulator of provision of the top fastening of a back seat belt

PERFORMANCE ORDER
1. For access to the bottom bolts of fastening of a seat belt unscrew a pillow of back sitting forward or remove it. Remove a rug and unscrew to a sootvetstvo a yushchy bolt from a floor (see fig. An arrangement of the bottom bolt of fastening of a back seat belt on the Hatchback models).
2. Remove a decorative slip and unscrew a bolt of the top fastening of a seat belt to a back rack of a body (see fig. Removal of the top fastening of a back seat belt from a body rack on the Hatchback models).
3. Open the corresponding back door and remove door consolidation from a back part of a doorway.
4. On the Hatchback models unscrew the screws, panels of furnish fixing the top back quarter to a car body. On the right side for access to screws open a box cover for a first-aid kit/sign of an emergency stop. Remove the top back quarter of the panel of furnish.
5. Unbend a forward edge of the bottom back quarter of the panel of furnish from a body. On the Sedan models the panel is fixed by clamps, and on the Hatchback models screws.
Remove the panel of furnish of the bottom back quarter for access to an inertial drum of a seat belt (see fig. An arrangement of an inertial drum of a back seat belt on the Hatchback models).
Unscrew a bolt of fastening of an inertial drum, remove an inertial drum and take a seat belt assembled from car salon.
If necessary, unscrew bolts and remove a regulator of provision of the top fastening of a back seat belt (see fig. Arrangement of bolts of fastening of a regulator of provision of the top fastening of a back seat belt).

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. At installation of a regulator of provision of the top fastening of a seat belt of an arrow on a regulator should be directed up.