Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
- 3. Repair of DOHC engines
   3.2. General information
   3.3. Removal and engine installation
   3.4. Replacement of support of the power unit
   + 3.5. Gear belt, pulleys, pulley of the mechanism of a tension and intermediate pulley
   3.6. A gear belt with the automatic mechanism of a tension
   3.7. Forward sealing ring of a camshaft
   3.8. Camshafts
   3.9. Installation of a head of the block of cylinders on the engine established in the car
   3.10. Installation of a head of the block of cylinders on the engine which has been removed from the car
   3.11. Repair of a head of the block of cylinders
   3.12. Hydraulic pushers of valves
   3.13. Replacement of a forward sealing ring of a cranked shaft
   3.14. Oil pallet
   3.15. Oil pump
   3.16. Oil radiator
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



3.16. Oil radiator

GENERAL INFORMATION

Arrangement of nuts of fastening of the oil radiator, seen through a spoiler

Removal

PERFORMANCE ORDER
1. For improvement of access to an oil radiator previously remove a radiator of system of cooling. Also if necessary remove a front bumper.
2. Unscrew the pipelines going to an oil radiator and close them jams.
3. Unscrew two nuts and remove an oil radiator from an arm.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. If necessary finish level of engine oil to norm.