Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
- 3. Repair of DOHC engines
   3.2. General information
   3.3. Removal and engine installation
   3.4. Replacement of support of the power unit
   + 3.5. Gear belt, pulleys, pulley of the mechanism of a tension and intermediate pulley
   3.6. A gear belt with the automatic mechanism of a tension
   3.7. Forward sealing ring of a camshaft
   3.8. Camshafts
   3.9. Installation of a head of the block of cylinders on the engine established in the car
   3.10. Installation of a head of the block of cylinders on the engine which has been removed from the car
   3.11. Repair of a head of the block of cylinders
   3.12. Hydraulic pushers of valves
   3.13. Replacement of a forward sealing ring of a cranked shaft
   3.14. Oil pallet
   3.15. Oil pump
   3.16. Oil radiator
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



3.4. Replacement of support of the power unit

GENERAL INFORMATION

Replacement of support of the power unit is made in the same way, as well as for models with SOHC engines. Before replacement of support of the power unit remove an engine mudguard. At installation it is necessary to use a new mudguard of the engine.