Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
- 4. Repair of the diesel engine
   4.2. General information
   4.3. The repair which is not demanding removal of the engine
   4.4. Compression check
   4.5. Top dead point (VMT) of the piston of the first cylinder
   4.6. Cover of a head of the block of cylinders
   4.7. Pulley of a cranked shaft
   4.8. Casings of a gear belt
   4.9. Replacement of a gear belt
   4.10. Check and installation of phases of a gazoraspredeleniye
   + 4.11. Mechanism of a tension of a gear belt and pulleys
   4.12. Replacement of a sealing ring of a camshaft
   4.13. Check and adjustment of gaps of valves
   4.14. Camshaft and pushers
   4.15. Head of the block of cylinders
   4.16. Oil pallet
   4.17. Oil pump
   4.18. Replacement of a sealing ring of the oil pump
   4.19. Oil radiator
   + 4.20. Pistons with rods
   4.21. Flywheel
   4.22. Replacement of sealing rings of a cranked shaft
   4.23. Replacement of support of the power unit
   4.24. Recommendations about engine removal
   4.25. Removal and engine installation
   4.26. Engine repair
   4.27. Engine start after major maintenance
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



4.19. Oil radiator

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports.
2. Merge cooling liquid from system of cooling or press hoses of supply of cooling liquid to an oil radiator.
3. Establish the corresponding container under the oil filter. Unscrew the oil filter.
4. Weaken collars and remove hoses of supply of cooling liquid to an oil radiator.
5. Unscrew the central bolt of fastening of an oil radiator and remove it from the engine.

Installation

PERFORMANCE ORDER
1. Establish an oil sealing ring in dredging of an oil radiator and establish an oil radiator on the block of cylinders.
2. Fix an oil radiator a bolt.
3. Connect to an oil radiator hoses of supply of cooling liquid and fix them collars.
4. Establish the new oil filter.
5. Lower the car and check oil level in the engine.
6. Fill in cooling liquid in system of cooling of the engine. Start the engine and check an oil radiator on tightness.