Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
- 4. Repair of the diesel engine
   4.2. General information
   4.3. The repair which is not demanding removal of the engine
   4.4. Compression check
   4.5. Top dead point (VMT) of the piston of the first cylinder
   4.6. Cover of a head of the block of cylinders
   4.7. Pulley of a cranked shaft
   4.8. Casings of a gear belt
   4.9. Replacement of a gear belt
   4.10. Check and installation of phases of a gazoraspredeleniye
   + 4.11. Mechanism of a tension of a gear belt and pulleys
   4.12. Replacement of a sealing ring of a camshaft
   4.13. Check and adjustment of gaps of valves
   4.14. Camshaft and pushers
   4.15. Head of the block of cylinders
   4.16. Oil pallet
   4.17. Oil pump
   4.18. Replacement of a sealing ring of the oil pump
   4.19. Oil radiator
   + 4.20. Pistons with rods
   4.21. Flywheel
   4.22. Replacement of sealing rings of a cranked shaft
   4.23. Replacement of support of the power unit
   4.24. Recommendations about engine removal
   4.25. Removal and engine installation
   4.26. Engine repair
   4.27. Engine start after major maintenance
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



4.7. Pulley of a cranked shaft

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports. Remove the right forward wheel.
2. Remove auxiliary driving belts.
3. Unscrew bolts of fastening of an auxiliary pulley to a pulley of a cranked shaft and remove an auxiliary pulley.

Installation

Installation of a pulley of an auxiliary belt
At installation of a pulley of an auxiliary belt combine dredging on a pulley with a pin of a pulley of a gear belt.

PERFORMANCE ORDER
1. Establish a pulley of auxiliary belts to a gear pulley of a cranked shaft, thus combine openings in pulleys with an adjusting pin of a pulley of a gear belt. Fix an auxiliary pulley bolts, having tightened them the demanded moment (see drawing).
2. Establish an auxiliary driving belt.
3. Establish a wheel and lower the car.