Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
- 5. Cooling system
   5.2. General information
   5.3. Antifreeze
   5.4. Washing of system of cooling
   5.5. Plums of cooling liquid
   5.6. Filling of system of cooling
   5.7. A radiator (models with a mechanical transmission)
   5.8. A radiator (models with an automatic transmission)
   5.9. Check and radiator cleaning
   5.10. Thermostat
   5.11. Check of operability of the thermostat
   5.12. Water pump
   5.13. Radiator fan
   5.14. A broad tank and the sensor of level of cooling liquid
   5.15. The sensor of the index of temperature of cooling liquid
   5.16. Temperature-sensitive element of the fan of a radiator
   5.17. Control panel heater
   5.18. Heater radiator
   5.19. Engine of the fan of a heater
   5.20. Ventilation nozzles
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



5.14. A broad tank and the sensor of level of cooling liquid

BROAD TANK

Removal

PERFORMANCE ORDER
1. Fastening of a broad tank is carried out by one screw. If it is necessary to move aside a broad tank, unscrew the screw and, without disconnecting from a broad tank hoses, move it aside.
2. Disconnect from a broad tank two top hoses and, having lifted up, tie up them in this situation to reduce loss of cooling liquid.
3. Unscrew the screw, a fixing tank, and raise a tank up as far as possible.
4. Establish under a broad tank the corresponding container, then remove the bottom hose and merge cooling liquid from a tank in the container. Tie up the bottom hose of a broad tank as it is possible above for reduction of losses of cooling liquid.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. Check level and if necessary add cooling liquid.

THE SENSOR OF LEVEL OF COOLING LIQUID

The sensor of level of cooling liquid is established in a cover of a broad tank. If the sensor is faulty, it is necessary to replace it together with a cover of a broad tank.