Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
- 5. Cooling system
   5.2. General information
   5.3. Antifreeze
   5.4. Washing of system of cooling
   5.5. Plums of cooling liquid
   5.6. Filling of system of cooling
   5.7. A radiator (models with a mechanical transmission)
   5.8. A radiator (models with an automatic transmission)
   5.9. Check and radiator cleaning
   5.10. Thermostat
   5.11. Check of operability of the thermostat
   5.12. Water pump
   5.13. Radiator fan
   5.14. A broad tank and the sensor of level of cooling liquid
   5.15. The sensor of the index of temperature of cooling liquid
   5.16. Temperature-sensitive element of the fan of a radiator
   5.17. Control panel heater
   5.18. Heater radiator
   5.19. Engine of the fan of a heater
   5.20. Ventilation nozzles
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



5.16. Temperature-sensitive element of the fan of a radiator

GENERAL INFORMATION

Prevention

At installation of a temperature-sensitive element use a new sealing ring.


Removal

Arrangement термодатчи turning on of the fan of a radiator on models of 2,0 l SOHC (bottom view)

PERFORMANCE ORDER
1. The temperature-sensitive element of the fan of a radiator is established in the bottom right corner of a radiator (see drawing).
2. Check working capacity термодат a chik of the fan of a radiator. The fan should turn on at excess of working temperature of the engine, that is some minutes prior to an entrance of an arrow of the index of temperature of the engine in red sector. If the fan does not turn on, remove wires from a temperature-sensitive element, connect them among themselves and include зажига scientific research institute. If the fan after that earns, possibly, failed термодат a chik which is subject to replacement. In case the fan still does not work, check, whether tension to a temperature-sensitive element moves. If tension on термодатчи ке is absent, probably, damage of wires, or the fuse fused.
3. Remove a weight wire from the accumulator, then disconnect the electric socket from a temperature-sensitive element of the fan of a radiator.
4. Merge cooling liquid from cooling system.
5. Unscrew a temperature-sensitive element of the fan of a radiator from a radiator and remove condense a telny ring.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. At installation of a temperature-sensitive element use a new sealing ring. Fill in cooling liquid in cooling system.
2. In summary start the engine, warm up it to normal working temperature and check operability of the fan of a radiator.