Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
- 5. Cooling system
   5.2. General information
   5.3. Antifreeze
   5.4. Washing of system of cooling
   5.5. Plums of cooling liquid
   5.6. Filling of system of cooling
   5.7. A radiator (models with a mechanical transmission)
   5.8. A radiator (models with an automatic transmission)
   5.9. Check and radiator cleaning
   5.10. Thermostat
   5.11. Check of operability of the thermostat
   5.12. Water pump
   5.13. Radiator fan
   5.14. A broad tank and the sensor of level of cooling liquid
   5.15. The sensor of the index of temperature of cooling liquid
   5.16. Temperature-sensitive element of the fan of a radiator
   5.17. Control panel heater
   5.18. Heater radiator
   5.19. Engine of the fan of a heater
   5.20. Ventilation nozzles
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



5.17. Control panel heater

Removal

Through an opening for installation of hours unscrew two screws of fastening of the control panel a heater

Vyvinchivaniye of the right screw of fastening of the control panel heater

The managements removed a cable with fixing brackets

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Remove decorative furnish of deepening for feet of the passenger, casings of a steering column both the top and bottom decorative panels of a combination of devices.
3. Remove from the dashboard hours or the board computer.
4. In a niche for hours or the board computer unscrew two screws of fastening of the control panel of a heater, then unscrew the remained screw of fastening of the right part of the control panel which is available after removal of the bottom furnish of a combination of devices (see fig. Through an opening for установ ки hours unscrew two screws of fastening of the control panel a heater, Vyvinchivaniye of the right screw of fastening of the control panel a heater).
5. From deepening for feet passages ра disconnect from a reverse side of the control panel a cable heater from control levers. A cable of management fasten plastic brackets, and in certain cases in addition metal brackets which are necessary for removing before cable release from a control lever (see fig. The managements removed a cable with fixing brackets). Mark a management cable for repeated installation them on the places.
6. Having pulled on itself, remove the control panel a heater from the dashboard and disconnect from it electric sockets.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. In summary, moving control levers a heater from an emphasis against the stop, check heater work.