Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
- 5. Cooling system
   5.2. General information
   5.3. Antifreeze
   5.4. Washing of system of cooling
   5.5. Plums of cooling liquid
   5.6. Filling of system of cooling
   5.7. A radiator (models with a mechanical transmission)
   5.8. A radiator (models with an automatic transmission)
   5.9. Check and radiator cleaning
   5.10. Thermostat
   5.11. Check of operability of the thermostat
   5.12. Water pump
   5.13. Radiator fan
   5.14. A broad tank and the sensor of level of cooling liquid
   5.15. The sensor of the index of temperature of cooling liquid
   5.16. Temperature-sensitive element of the fan of a radiator
   5.17. Control panel heater
   5.18. Heater radiator
   5.19. Engine of the fan of a heater
   5.20. Ventilation nozzles
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



5.18. Heater radiator

Removal

Removal of a plastic casing of a radiator of a heater

Unscrewing of the screw of fastening of a belt of a radiator of a heater

PERFORMANCE ORDER
1. Merge cooling liquid from cooling system.
2. Working in a motor compartment, remove the hoses submitting cooling liquid to the radiator of a heater from branch pipes of a radiator of a heater.
3. In salon of the car remove a forward part of the central console.
4. Unscrew two screws in a forward part and two screws in a back part and remove a plastic casing of a radiator of a heater (see fig. Removal of a plastic casing of a radiator of a heater).
5. Unscrew two screws, belts of fastening of a radiator of a heater fixing a forward part, then lower belts down and take a heater radiator from the panel (see fig. Unscrewing of the screw of fastening of a belt of a radiator of a heater). Take branch pipes of a radiator of a heater from a partition of a motor compartment. At existence remove condense telny rings of branch pipes of a radiator of a heater.

Installation

Arrangement of sealing rings on a branch pipe of a radiator of a heater
1–branch pipe of a radiator of a heater;
2–partition of a motor compartment;
3–heater casing;
4–sealing rings

Installation is made in sequence, return to removal taking into account the next moments...

PERFORMANCE ORDER
1. Establish sealing rings of branch pipes of a radiator of a heater in соответ to stviya about fig. An arrangement of sealing rings on a branch pipe of a radiator of a heater.
2. Check that rubber laying is precisely placed between belts of fastening and a heater radiator.
3. Fill in cooling liquid in cooling system.