Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
- 5. Cooling system
   5.2. General information
   5.3. Antifreeze
   5.4. Washing of system of cooling
   5.5. Plums of cooling liquid
   5.6. Filling of system of cooling
   5.7. A radiator (models with a mechanical transmission)
   5.8. A radiator (models with an automatic transmission)
   5.9. Check and radiator cleaning
   5.10. Thermostat
   5.11. Check of operability of the thermostat
   5.12. Water pump
   5.13. Radiator fan
   5.14. A broad tank and the sensor of level of cooling liquid
   5.15. The sensor of the index of temperature of cooling liquid
   5.16. Temperature-sensitive element of the fan of a radiator
   5.17. Control panel heater
   5.18. Heater radiator
   5.19. Engine of the fan of a heater
   5.20. Ventilation nozzles
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



5.19. Engine of the fan of a heater

Removal

Removal of a casing from the engine of the fan of a heater

Unscrewing of screws of fastening of the fan of a heater

Arrangement of a bracket of fastening of an arm of the resistor on the engine of the fan of a heater

PERFORMANCE ORDER
1. The engine of the fan of a heater is located under the panel in the lower part of a windscreen.
2. Remove a fairing located in the lower part of a windscreen.
3. Remove the engine and drafts of a screen wiper.
4. Remove a casing from the top part of the electric motor (see. Removal of a casing from the engine of the fan of a heater).
5. Disconnect the electric socket from the engine of the fan of a heater
Unscrew two screws and take the heater fan from a casing (see fig. Unscrewing of screws of fastening of the fan of a heater).
Compress brackets of fastening and remove an arm with the resistor. After установ ки the new resistor accurately fix it fastening brackets (see fig. An arrangement of a bracket of fastening of an arm of the resistor on the engine of the fan of a heater).
If the engine of the fan of a heater failed replace it as its repair is not provided.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. Check correctness of an arrangement of a rubber pillow of the engine of the fan of a heater.