Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
- 5. Cooling system
   5.2. General information
   5.3. Antifreeze
   5.4. Washing of system of cooling
   5.5. Plums of cooling liquid
   5.6. Filling of system of cooling
   5.7. A radiator (models with a mechanical transmission)
   5.8. A radiator (models with an automatic transmission)
   5.9. Check and radiator cleaning
   5.10. Thermostat
   5.11. Check of operability of the thermostat
   5.12. Water pump
   5.13. Radiator fan
   5.14. A broad tank and the sensor of level of cooling liquid
   5.15. The sensor of the index of temperature of cooling liquid
   5.16. Temperature-sensitive element of the fan of a radiator
   5.17. Control panel heater
   5.18. Heater radiator
   5.19. Engine of the fan of a heater
   5.20. Ventilation nozzles
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



5.20. Ventilation nozzles

CENTRAL NOZZLES

Removal

Use of an edge of a screw-driver for removal of the central snuffled ventilation systems

Removal of the central snuffled ventilation systems from the dashboard

PERFORMANCE ORDER
1. Using a screw-driver edge as the lever, and being careful, uncover the button of the switch of the alarm light system.
2. Using a screw-driver edge as the lever, and having enclosed under it pure rags, being careful, remove the central nozzles from the dashboard (see fig. Use of an edge of a screw-driver for removal of the central snuffled ventilation systems, Removal of the central snuffled ventilation systems from the dashboard).
3. If necessary remove a casing of the central snuffled ventilation as follows.
4. Establish a wheel of adjustment of a stream of air in situation 0, then pull the lever aside and release it from a fastening element.
5. Using an edge of a thin screw-driver, release two bottom brackets of fixing and remove a casing from the dashboard.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. If the casing acted in film snuffled ventilation, the lever of a regulator of a stream of air move to the limiter, then insert into a fastening element, thus a wheel of a regulator should be in situation 0.

NOZZLES FROM THE PASSENGER

Removal

PERFORMANCE ORDER
1. Using a screw-driver edge as the lever, and having enclosed under it pure rags, being careful, remove a nozzle from the dashboard.
2. If necessary remove a casing of the central snuffled ventilation as follows. Establish a wheel of adjustment of a stream of air in situation 0, then pull the lever aside and release it from a fastening element.
3. Unscrew the screw, a fixing casing to the dashboard, then release brackets of fastening and take a casing from the panel.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. If the casing acted in film snuffled ventilation, the lever of a regulator of a stream of air move to the limiter, then insert into a fastening element, thus a wheel of a regulator should be in situation 0.

NOZZLES FROM THE DRIVER

Removal

PERFORMANCE ORDER
1. Using a screw-driver edge as the lever, and having enclosed under it pure rags, being careful, remove a nozzle from the dashboard.
2. If necessary remove a casing of the central snuffled ventilation as follows. Establish a wheel of adjustment of a stream of air in situation 0, then pull the lever aside and release it from a fastening element.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. If the casing acted in film snuffled ventilation, the lever of a regulator of a stream of air move to the limiter, then insert into a fastening element, thus a wheel of a regulator should be in situation 0.

NOZZLES OBDUVA OF LATERAL GLASSES

Removal

PERFORMANCE ORDER
1. Using an edge of a thin screw-driver as the lever, having enclosed under it pure rags and being careful, take nozzles from the dashboard.

Installation

PERFORMANCE ORDER
1. For installation simply press nozzles into the dashboard.