Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
- 5. Cooling system
   5.2. General information
   5.3. Antifreeze
   5.4. Washing of system of cooling
   5.5. Plums of cooling liquid
   5.6. Filling of system of cooling
   5.7. A radiator (models with a mechanical transmission)
   5.8. A radiator (models with an automatic transmission)
   5.9. Check and radiator cleaning
   5.10. Thermostat
   5.11. Check of operability of the thermostat
   5.12. Water pump
   5.13. Radiator fan
   5.14. A broad tank and the sensor of level of cooling liquid
   5.15. The sensor of the index of temperature of cooling liquid
   5.16. Temperature-sensitive element of the fan of a radiator
   5.17. Control panel heater
   5.18. Heater radiator
   5.19. Engine of the fan of a heater
   5.20. Ventilation nozzles
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



5.5. Plums of cooling liquid

PERFORMANCE ORDER
1. Establish the car on an equal horizontal platform and open a cover of a broad tank. If the engine hot, close a cover of a broad tank a thick layer of a fabric and slowly unscrew a cover before emergence of a hissing sound. After the hissing termination slowly unscrew, and uncover a broad tank.
2. On models with DOHC engines remove the bottom protective plate of the engine.
3. Establish the corresponding container under connection of the bottom hose of a radiator, then weaken a collar and remove the bottom hose from a radiator. If the hose densely sits on a radiator branch pipe, pull and at the same time turn it. Merge cooling liquid in the container.
4. The block of cylinders of the engine plum of cooling liquid therefore the part of cooling liquid remains in cooling system has no stopper.
5. If cooling liquid is strongly polluted, wash out cooling system. As cooling liquid невозмож but to merge completely from cooling system therefore it is recommended to wash out each time at plum of cooling liquid cooling system.