Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
- 6. Fuel system
   6.2. General information
   6.3. Air filter
   6.4. The block of adjustment of temperature of air arriving in the engine
   6.5. Check of the fuel pump
   6.6. Removal and installation of the fuel pump
   6.7. Fuel tank
   6.8. Fuel level sensor
   6.9. Separator паров fuels (l model 1,6 and 1,8)
   6.10. Accelerator pedal
   6.11. Accelerator cable
   6.12. Carburetor
   6.13. Removal and carburetor installation
   6.14. Adjustment of turns of idling and the contents WITH
   6.15. Needle and float
   6.16. Vacuum diaphragm of a butterfly valve of the secondary chamber
   6.17. Diaphragm of an ekonomayzer
   6.18. Accelerating pump
   6.19. Knot of an air automatic zaslonka
   + 6.20. Vacuum blocks of moving of an air automatic zaslonka
   6.21. Carburetor filter
   6.22. Adjustment of the shock-absorber of a butterfly valve
   6.23. Sensor of provision of a butterfly valve (an automatic transmission)
   6.24. Check of the valve of increase in turns of idling
   6.25. The electromagnetic valve of idling on models of 1,8 l
   6.26. Inlet collector
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



6.16. Vacuum diaphragm of a butterfly valve of the secondary chamber

GENERAL INFORMATION

Prevention

In the presence of malfunction it is necessary to replace assembled the block of a diaphragm of the secondary chamber as repair of the block is not provided.


Check

PERFORMANCE ORDER
1. Using the vacuum pump with a manometer, create depression about 300 Mbar in the diaphragm block through a hose the closest from the carburetor case. Check, that depression in the block kept a long time. In the presence of leaks eliminate it or replace соответ a stvuyushchy element.

Removal

PERFORMANCE ORDER
1. On early models remove the air filter. On later models disconnect an air pipe from the air filter, then disconnect a vacuum hose and a hose of ventilation of a case from the air chamber. Unscrew three screws and remove the air chamber together with an air line.
2. Disconnect a vacuum tube from the block of a vacuum diaphragm.
3. Using a screw-driver edge, disconnect the spherical hinge of draft of a diaphragm from draft of a secondary butterfly valve.
4. On models 1,6 and 1,8 of l unscrew two screws and remove a separator паров fuels from an arm. Move a separator aside, but do not deform fuel hoses.
5. Unscrew three screws and remove the block of a vacuum diaphragm together with an arm from the carburetor case.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.