Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
- 6. Fuel system
   6.2. General information
   6.3. Air filter
   6.4. The block of adjustment of temperature of air arriving in the engine
   6.5. Check of the fuel pump
   6.6. Removal and installation of the fuel pump
   6.7. Fuel tank
   6.8. Fuel level sensor
   6.9. Separator паров fuels (l model 1,6 and 1,8)
   6.10. Accelerator pedal
   6.11. Accelerator cable
   6.12. Carburetor
   6.13. Removal and carburetor installation
   6.14. Adjustment of turns of idling and the contents WITH
   6.15. Needle and float
   6.16. Vacuum diaphragm of a butterfly valve of the secondary chamber
   6.17. Diaphragm of an ekonomayzer
   6.18. Accelerating pump
   6.19. Knot of an air automatic zaslonka
   + 6.20. Vacuum blocks of moving of an air automatic zaslonka
   6.21. Carburetor filter
   6.22. Adjustment of the shock-absorber of a butterfly valve
   6.23. Sensor of provision of a butterfly valve (an automatic transmission)
   6.24. Check of the valve of increase in turns of idling
   6.25. The electromagnetic valve of idling on models of 1,8 l
   6.26. Inlet collector
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



6.25. The electromagnetic valve of idling on models of 1,8 l

GENERAL INFORMATION

Arrangement the electromagician of the nitny valve of idling on models of 1,8 l

On models of 1,8 l the carburetor has the electromagnetic valve of idling which blocks supply of fuel in idling system at switching off of ignition and excludes operation of the engine with kalilny ignition (see drawing).

The electromagnetic valve of idling is switched on constantly at ignition inclusion. At malfunction of a winding of the electromagnetic valve or in a valve power-supply circuit the engine can unstably work at idling turns, and at increase in turns of the engine its work can be normal.

Check

PERFORMANCE ORDER
1. First of all check tension presence on contacts of the electromagnetic valve of idling at ignition inclusion.
2. In the presence of tension on contacts of the electromagnetic valve of idling make the following check.
3. Unscrew the electromagnetic valve of idling from the carburetor and connect the valve case to the negative plug of the accumulator. When giving tension of the positive plug of the accumulator to the central contact of the electromagnetic valve click should be audible and in the valve the needle should be involved.
4. At malfunction of the electromagnetic valve of idling replace it.