Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
- 6. Fuel system
   6.2. General information
   6.3. Air filter
   6.4. The block of adjustment of temperature of air arriving in the engine
   6.5. Check of the fuel pump
   6.6. Removal and installation of the fuel pump
   6.7. Fuel tank
   6.8. Fuel level sensor
   6.9. Separator паров fuels (l model 1,6 and 1,8)
   6.10. Accelerator pedal
   6.11. Accelerator cable
   6.12. Carburetor
   6.13. Removal and carburetor installation
   6.14. Adjustment of turns of idling and the contents WITH
   6.15. Needle and float
   6.16. Vacuum diaphragm of a butterfly valve of the secondary chamber
   6.17. Diaphragm of an ekonomayzer
   6.18. Accelerating pump
   6.19. Knot of an air automatic zaslonka
   + 6.20. Vacuum blocks of moving of an air automatic zaslonka
   6.21. Carburetor filter
   6.22. Adjustment of the shock-absorber of a butterfly valve
   6.23. Sensor of provision of a butterfly valve (an automatic transmission)
   6.24. Check of the valve of increase in turns of idling
   6.25. The electromagnetic valve of idling on models of 1,8 l
   6.26. Inlet collector
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



6.3. Air filter

Removal

Arrangement of a hose of supply of the air which has been warmed up by an inlet collector to the carburetor

Place of connection of a hose of ventilation of a case to the case of the air filter

PERFORMANCE ORDER
1. Remove filtering element of the air filter.
2. Take a hose of ventilation of a case from a fastening bracket on the left side of the case of the air filter.
3. Disconnect from the entrance channel of the air filter a branch pipe of supply of the air which has been warmed up by an inlet collector, and remove the case of the air filter from the carburetor (see fig. An arrangement of a hose of supply of the air which has been warmed up by an inlet collector to the carburetor).
4. Incline the case of the air filter back and disconnect from the lower part a hose of ventilation of a case (see fig. A place of connection of a hose of ventilation of a case to the case of the air filter). At existence disconnect a vacuum hose from the regulator of temperature arriving in the engine of air.
5. Remove consolidation from under the case of the air filter.

Installation

PERFORMANCE ORDER
1. Check a condition of a branch pipe of supply of the air which has been warmed up by final коллекто rum and, if necessary, replace it.
2. Establish the new consolidation located between the case of the air filter and the carburetor.
3. Connect a hose of ventilation of a case to a branch pipe in the lower part of the case of the air filter. At existence подсоеди threads a vacuum hose to a regulator of temperature of air arriving in the engine.
4. Establish the case of the air filter on the carburetor. Thus at the same time combine it with a branch pipe of supply of the air which has been warmed up by a final collector.
5. Fix a hose of ventilation of a case a plastic bracket on the left side of the case of the air filter.
6. Establish filtering element of the air filter.