Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
- 6. Fuel system
   6.2. General information
   6.3. Air filter
   6.4. The block of adjustment of temperature of air arriving in the engine
   6.5. Check of the fuel pump
   6.6. Removal and installation of the fuel pump
   6.7. Fuel tank
   6.8. Fuel level sensor
   6.9. Separator паров fuels (l model 1,6 and 1,8)
   6.10. Accelerator pedal
   6.11. Accelerator cable
   6.12. Carburetor
   6.13. Removal and carburetor installation
   6.14. Adjustment of turns of idling and the contents WITH
   6.15. Needle and float
   6.16. Vacuum diaphragm of a butterfly valve of the secondary chamber
   6.17. Diaphragm of an ekonomayzer
   6.18. Accelerating pump
   6.19. Knot of an air automatic zaslonka
   + 6.20. Vacuum blocks of moving of an air automatic zaslonka
   6.21. Carburetor filter
   6.22. Adjustment of the shock-absorber of a butterfly valve
   6.23. Sensor of provision of a butterfly valve (an automatic transmission)
   6.24. Check of the valve of increase in turns of idling
   6.25. The electromagnetic valve of idling on models of 1,8 l
   6.26. Inlet collector
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



6.6. Removal and installation of the fuel pump

Removal

Detachment of a fuel hose from the fuel pump on model of 1,6 l

Removal of the fuel pump on models of 1,6 l

PERFORMANCE ORDER
1. The fuel pump is located in the right back part of a cover of a head of the block of cylinders.
2. Remove a weight wire from the accumulator.
3. Disconnect fuel hoses from the fuel pump (see fig. A detachment of a fuel hose from the fuel pump on model of 1,6 l). If necessary mark hoses and close them the corresponding jams.
4. Unscrew two bolts and remove the fuel pump from a cover of a head of the block of cylinders (see fig. Removal of the fuel pump on models of 1,6 l).
5. Remove the plastic sealing block.

Removal

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. Check correctness of connection of fuel hoses. Tighten bolts of fastening of the fuel pump the demanded moment.
2. Start the engine and check fuel system on existence of leaks. In the presence of leaks immediately switch off the engine and eliminate leak. At installation of the fuel pump start of the engine can last more long than the usual.