Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
- 8. Exhaust system and system of fall of toxicity of exhaust gases
   8.2. System of fall of toxicity of exhaust gases
   8.3. System of repeated burning of exhaust gases (EGR)
   8.4. The EGR valve (models with Multec system)
   8.5. EGR valve (Simtec system)
   8.6. EGR module (X16 SZ models)
   8.7. Knot of the air pump (Simtec system)
   8.8. Valve of an otsechka of system of reduction of toxicity
   8.9. The switching-off valve of system of reduction of toxicity
   8.10. Tube and unidirectional valve of system of reduction of toxicity
   8.11. Catalyst
   8.12. The canister with coal
   8.13. The oxygen sensor (models with the catalyst)
   8.14. Final collector
   + 8.15. Exhaust system
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



8.7. Knot of the air pump (Simtec system)

Removal

PERFORMANCE ORDER
1. Tighten the hand brake, then lift a forward part of the car and fix on supports.
2. Remove the left forward wheel and protection of a wing.
3. Weaken a collar and remove an air hose from the pump.
4. Remove a weight wire from the accumulator.
5. Unscrew nuts and remove knot of the air pump. Disconnect from the pump the electric socket.
6. Disconnect a plait of wires of the pump from a pump arm.
7. Note an arrangement of the air pump on an arm.
8. Unscrew bolts and remove the pump from an insulator.
9. For check of an insulator unscrew three nuts, fixing a protective plate. Before removal of a protective plate put combination labels on a plate and an insulator.
10. Check a condition of the air filter of the pump.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.