Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
- 9. Fuel systems of the diesel engine
   9.2. General information
   9.3. Case of the air filter
   9.4. Accelerator pedal
   9.5. Fuel level sensor
   9.6. Fuel tank
   9.7. Heater of the fuel filter
   9.8. Water plums from the fuel filter
   9.9. Filling and pumping of fuel system
   9.10. Check and adjustment of the maximum turns
   9.11. Check and adjustment of turns of idling
   9.12. Electromagnetic valve of a stop of the engine
   9.13. Fuel pump of a high pressure
   9.14. Check and adjustment of the moment of injection of fuel
   9.15. Fuel nozzles
   9.16. Turbonagnetatel
   9.17. Heat exchanger
   9.18. Inlet collector
   9.19. Final collector
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



9.13. Fuel pump of a high pressure

GENERAL INFORMATION

Arrangement of a thermostatic capsule of the fuel pump

Arrangement of nuts (And) fastenings of a forward part and bolts (In) fastenings of a back part of the fuel pump

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator. Remove an inlet collector.
2. Remove a pulley from the fuel pump.
3. Remove the oil filter.
4. Remove an accelerator torso from the fuel pump.
5. Press hoses of supply of cooling liquid, weaken collars and remove both hoses from a thermostatic capsule of the fuel pump (see fig. Arrangement of a thermostatic capsule of the fuel pump).
6. Disconnect fuel hoses from the fuel pump and close them jams.
7. Unscrew couplings and remove топливоп роводы, connecting the fuel pump with fuel nozzles.
8. Disconnect the electric socket from the control unit the electromagnetic valve of a stop of the engine.
9. Using a marker or a chertilka, note a vystupaniye of a forward part of the fuel pump concerning an arm.
10. Unscrew bolts of fastening of a back part of the fuel pump to an arm of the block of cylinders (see fig. Arrangement of nuts of fastening of a forward part and bolts of fastening of a back part of the fuel pump).
11. Unscrew nuts of fastening of a forward part of the fuel pump and remove the fuel pump.
12. Establish the fuel pump on the engine and, without tightening, put the clamps also bolts of fastening of the fuel pump.
13. Establish the fuel pump on an arm according to are earlier put ми with labels and previously tighten nuts and bolts of fastening of the pump.
14. Establish a pulley of the fuel pump and a gear belt.
15. Adjust the moment of injection of the fuel pump.
16. Establish the fuel pipes connecting the fuel pump and fuel nozzles.
17. Connect the electric socket to the control unit the electromagnetic valve of a stop of the engine.
18. Connect submitting and returnable fuel hoses to the fuel pump.
19. Connect hoses of supply of cooling liquid to a thermostatic capsule of the fuel pump.
20. Connect an accelerator torso to the fuel pump.
21. Establish an inlet collector.
22. Establish the oil filter and add engine oil in the engine.
23. Connect the accumulator, start the engine and check tightness of fuel system.
24. Warm up the engine to working temperature and if it is necessary, adjust idling turns.