Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
- 9. Fuel systems of the diesel engine
   9.2. General information
   9.3. Case of the air filter
   9.4. Accelerator pedal
   9.5. Fuel level sensor
   9.6. Fuel tank
   9.7. Heater of the fuel filter
   9.8. Water plums from the fuel filter
   9.9. Filling and pumping of fuel system
   9.10. Check and adjustment of the maximum turns
   9.11. Check and adjustment of turns of idling
   9.12. Electromagnetic valve of a stop of the engine
   9.13. Fuel pump of a high pressure
   9.14. Check and adjustment of the moment of injection of fuel
   9.15. Fuel nozzles
   9.16. Turbonagnetatel
   9.17. Heat exchanger
   9.18. Inlet collector
   9.19. Final collector
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



9.4. Accelerator pedal

Removal

Arrangement of a lock ring of an axis of a pedal of an accelerator

PERFORMANCE ORDER
1. In salon of the car remove the bottom panel of furnish in deepening for feet of the driver.
2. Remove a cover of a cable of an accelerator from an arm in the top part of a pedal and disconnect an accelerator cable from a pedal.
3. On the right side of an axis of a pedal remove a lock ring, then take an axis on the left side of an arm (see drawing). Remove plugs of an axis of a pedal and a returnable spring of a pedal.
4. Check a condition of plugs of an axis of a pedal of an accelerator and in the presence of wear replace them.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. In summary check butterfly valve work, and also, if necessary, adjust an accelerator cable.